歡迎進入深圳市漢斯福特科技有限公司網站！
13352927502
歡迎進入深圳市漢斯福特科技有限公司網站！
13352927502
Product Center
產品簡介
數字扭力測定儀，帶遠程探頭，USB輸出，數據采集功能。
Checkline DIS-IP Digital Torque Tester with flanged remote sensor calibrates torque tools up to 362 lbf-ft. It has an accuracy of ± .5% F.S., ± 1 LSD. Select Peak, Real Time or Peak Down measurement modes. Programmable high/low setpoints enable GO/NO GO testing; green lights between high and low setpoints, and red for under low and over high setpoint. Check-Line DIS-IP
Use the 800 internal memory for peak data recall or USB download for analysis by Imada data acquisition software SW-1SV-USB.
Calibrate your own torque wrenches and electric drivers and ａnd save down time. Do not use with power drivers or impact tools (Ask for DI-1M impact wrench torque tester).
Heavy duty metal construction
lbf-in, kgf-cm, N-cm, or lbf-ft, kgf-m, N-m (see table below)
800 data memory for recall or for SPC download
USB output for SPC capability
Peak, Real Time and Peak Down measuring modes (selectable)
Accuracy: ±0.5% F.S. ±1 LSD (32° to 100°F)
Both clockwise and counterclockwise operation
AC adapter/charger included
Runs on internal NiCad batteries (8 hour use)
Programmable High/Low setpoints with GO/NO GO LED indicators and audible beep
配件
230V 230V Power Supply, No Cost Option supplied inplace of standard 115V
AP-100L L-Plate Mounting Bracket
ISO-17025 Upgrade from 3 point NIST traceable cert to ISO-17025 CertificateSW-1SV-USB Data Acquisition Software for Torque
SS-208 USB output cable (formerly CB-208)
訂貨型號
Model | Capacity | Drive |
DIS-IP5 | 0.20 - 44.00 lbf-in | 1/4" |
DIS-IP50 | 2.0 - 440.0 lbf-in | 3/8" |
DIS-IP200 | 20 - 1740 lbf-in | 1/2" |
DIS-IP500 | 20 - 4400 lbf-in | 3/4" |
相關型號
TT-3000
MTM
產品分類
相關文章
當前位置：
上一個：
返回列表
